6 Finishing
In the Finishing tab, you can specify document finishing features such as
separating sets of printed jobs, creating bi-fold or tri-fold documents, creating a
gutter, stapling and punching holes.
To return to the original settings, click Reset. The Reset button is available
when accessing the printer driver from the application's Print dialog box.
Separation
The Separation feature stacks print jobs so that one print job can be
distinguished from another. There are two separation methods: Rotate Copies
and Offset Jobs.
Rotate Copies
Rotate copies stacks each copy of a print job at a right angle in the output tray.
This feature requires the following:
Paper size selections are limited to Letter, A4, 16K, or B5 (JIS).
The selected paper size must be loaded into two paper sources, one
horizontally and one vertically.
The print job must contain multiple pages and be specified to print multiple
copies.
Rotating Copies
You can stack each copy of a print job at right angles in the output tray.
6-1 User Guide
To Next Page
Loading...
Need help?
General