Maintenance
3-4 OPERATION GUIDE
Replenishing Toner
This section explains how to replace the toner container. When replacing
the toner container, always replace the waste toner box at the same time.
If this box is full, the printer may be damaged or contaminated by the waste
toner that may spill over the box.
NOTE: During toner container replacement, temporarily put storage
media and computer supplies (such as floppy disks) away from around
the toner container. This is to avoid damaging media by the magnetism of
toner.
You do not have to turn printer power off before starting the replacement.
Any data that may be under printing process in the printer will be deleted if
you turn printer power off.
1
Open the printer front cover all the way.
2
Push the lock lever up and gently remove the toner container until its
handle appears.
NOTE: Do not pull the toner container all the way as it can fall off and the
toner spots the floor.
To Next Page
Loading...
Need help?
General