Troubleshooting
4-6 OPERATION GUIDE
Dirt on the top edge or back of the paper Check the paper ramp.
Open the printer left cover and check for toner on the
paper ramp. Clean the paper ramp using a soft, dry, lint-
free cloth. Refer to
Toner Container Replacement on page
3-3.
Check the transfer roller.
Open the printer left cover
1 and check the transfer
roller.
If the transfer roller is dirty
with toner, try printing
several pages.
Characters out of position Check the file or program.
Check whether the problem is being caused by a
PRESCRIBE command error. If the problem occurs only
with a specific file or program, the most likely cause is an
error in a parameter to a command or command syntax.
Printed Results Corrective Action
Transfer Roller
To Next Page
Loading...
Need help?
General