6 Get Started
4. Insert the nano SIM card into the flap of the SIM card
holder, making sure the cut-off corner is at the top
right (
), and then replace the flap of the SIM card
holder (
).
5. Slide the flap in the direction of the arrow to lock
it (
).
4
5
3
ᵪᵭᵡᵩ
Cut
6. Close the SIM/microSD card holder cover and replace
the back cover.
Warning: To ensure that your phone is waterproof, make
sure the SIM/microSD card holder cover and
back cover are properly sealed.
Optional: Insert the microSD Card
Note: The microSD card is sold separately.
1. Remove the back cover and open the SIM/microSD
card holder cover.
2. Insert the microSD card into the microSD card holder
with the gold contacts facing down. Gently push the
card in until it snaps into place.
SD
microSD card
holder
To Next Page
Loading...
Need help?
General
