Chapter 2 Basic Operations 2-4
2. 3 Replacement of Roll Paper
Roll 2 is an optional part.
The machine is equipped with the Roll 2 in the following instruction.
1. Pull up the Lever (1) and draw out the Roll Deck (2).
2. Remove the Roll Spool (3) with paper core from the Roll Deck.
1
3
NOTE
Confirm that the machine has finished the printing operation completely before opening the
Roll Deck.
If you open it during printing, a paper jam may occur.
NOTE
Note that a paper jam tends to occur at the time of roll end.
2
3
To Next Page
Loading...
