Broadcast
48
KM-NET for Clients
9. Broadcast
Allows you to send PRESCRIBE commands to the printing system (Broadcast). Also
allows you to use this menu to confirm and change the internal settings of the printing
system when using either a local or network connection (FRPO).
For details on PRESCRIBE commands, refer to the PRESCRIBE Command
Reference manual. For details on FRPO, refer to the Operation Guide of the printing
system.
Notes
• Broadcast does not work with printing systems on an IPX network.
• The FRPO parameter menu is not available depending on the printing system.
9.1. Broadcast
Perform the following procedure to use the broadcast function.
1 Click Broadcast to open the broadcast dialog box.
To Next Page
Loading...
