4-10
4. Selecting the Printer Settings
3 KPDL Error Report print out ON/OFF
Select one of the following emulation protocols and then touch the
“Detail” key. The [KPDL (Auto)] screen will appear.
KPDL, KPDL (Auto)
Select “ON” or “OFF”, as desired, under the KPDL error setting and
then touch the “Close” key. The display will return to the [Emulation]
screen.
• To cancel the setting, touch the “Back” key.
4 Auto emulation switching
The back-up emulation mode can be selected only when the emulation
protocol has been set to KPDL (Auto).
Select the desired emulation protocol under the back-up emulation
setting and then touch the “Close” key. The display will return to the
[Emulation] screen.
• To cancel the setting, touch the “Back” key.
5 KC-GL Page
Select “KC-GL” as the emulation protocol and then touch the “Detail”
key. The [KC-GL] screen will appear.
Select the desired paper format under the “Page Set” setting and
then touch the “Close” key. The display will return to the [Emulation]
screen.
• To cancel the setting, touch the “Back” key.
2
1
1
2
To Next Page
Loading...
Need help?
General
