2
1. Preparations
1-1 Accessories
• CD-ROM x 2
• This Operation Guide
• Quick Reference Guide (for Networks)
1-2 Required items
• When connecting the printer directly to your computer: Parallel cable (IEEE1284 compliant, 1.5 m or shorter) or serial cable
• When connecting the printer to a network: Ethernet cable (100Base-TX or 10Base-T)
*When you use a 10Base-T or 100Base-TX cable, make sure it is a shielded cable.
1-3 Name of parts (main body)
1 Memory Card (CompactFlash) slot
Insert the optional Memory Card (CompactFlash) here.
2 Parallel interface connector
When connecting the printer to your computer with a parallel
interface, connect a bi-directional parallel cable here.
3 Ethernet connector
When connecting the printer to a network, connect an
Ethernet cable here.
4 Serial interface connector
When connecting the printer to your computer with a serial
interface, connect a serial cable here.
5 Main switch
Turn this switch ON ( | ) first, prior to using the printer.
Always turn this switch OFF (O) when connecting the printer
cable, etc.
6 Operation panel
Use when performing settings, etc., at the printer itself.
To Next Page
Loading...
Need help?
General
