What to do if Kyocera M2535dn All in One Printer ejects blank sheets?
If your Kyocera All in One Printer is ejecting blank sheets, check the following: * When placing originals on the platen, ensure they are face-down and aligned with the slit glass. * When placing originals in the document processor, ensure they are face-up.
What to do if Kyocera M2535dn All in One Printer cannot print?
If your Kyocera All in One Printer is not printing, check the following: * Ensure the machine is plugged into an AC outlet. * Verify the machine is powered on. * Make sure the printer cable is securely connected. * If the machine was powered on before connecting the printer cable, power it on again after connecting the cable. * If the print job is paused, press [Resume] to resume printing. * If an error message is displayed, follow the corresponding procedure.
What to do if Kyocera M2535dn All in One Printer printouts are too light?
If your Kyocera All in One Printer's printouts are too light, consider the following: * If the machine is in Manual Density mode, select the correct density level. * Ensure the toner is distributed evenly within the toner container by shaking it from side to side several times. * If there's a message indicating the need for more toner, replace the toner container. * If the paper is damp, replace it with new paper. * If EcoPrint mode is enabled, disable it. * Also, verify that the paper type setting is correct for the paper being used.
General| Printer Type | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Resolution | 1200 x 1200 dpi |
| Automatic Duplex Printing | Yes |
| Display | LCD |
| Processor | 600 MHz |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Print Speed (Black) | 35 ppm |
| Connectivity | USB, Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
To Next Page
