3. Pull up the drum unit lever and remove the drum unit.
4. Take the new drum unit out of the drum kit
5. Return the new drum unit to its position, aligning the guides at both ends with the slots in the
machine. After that, press the drum unit levers down until they click.
Note: Put the old drum unit
in the plastic bag (supplied
with the new drum kit) and
discard it later according to
the local code or regulations
for waste disposal.
Note: Put the old drum unit in the plastic bag
(supplied with the new drum kit) and discard
it later according to the local code or
regulations for waste disposal.
To Next Page
Loading...
