My MA2000w displays an error
indication
Error Messages
If a problem has occurred in the machine, you will be notified by the following display.
+ The Attention indicator on the operation panel is lit or flashing.
+ An error code appears in the display on the operation panel.
+ KYOCERA Client Tool and Status Monitor will show the status of the machine.
If the Attention indicator is lit or flashing and an error code appears in the display on the operation
panel, check the KYOCERA Client Tool or Status Monitor.
Note: If the indicators light or flash repeatedly in manners not described above, a service error has
probably occurred. Turn off [Main Power], unplug the power cord, and then plug the power cord
black in and turn on [Main Power]. This may clear the error. Even if the error is not cleared,
contact your service representative.
Errors that can be resolved by the user are outlined below.
To Next Page
Loading...
