What to do if the Kyocera Print Server IB-51's Web page text doesn't display correctly?
If the text of the IB-51's Web page does not display properly, ensure that you are using a web browser version that is verified to work with the IB-51's Web page.
What to do if Kyocera Fax Machine cannot send document?
If your Kyocera Fax Machine cannot send a document, make sure the modular cord is correctly connected. If a 'Send error' is displayed, address the cause of the error and try sending again. Also, check if the TX (transmission) restriction is activated and cancel it if necessary.
Why Kyocera Fax Machine cannot receive document?
If your Kyocera Fax Machine cannot receive a document, ensure the modular cord is properly connected. If a 'Communication error' is displayed, address the cause of the error and ask the sender to retry. Also, verify whether the RX (reception) restriction is activated and cancel it if needed.
What to do if Kyocera Fax Machine cannot perform memory reception?
If your Kyocera Fax Machine cannot perform memory reception, receive after the memory has free space, or create free space in the memory.
What to do if Kyocera Fax Machine FAX box limit exceeded?
If the FAX box limit is exceeded on your Kyocera Fax Machine, press [OK] and delete documents from the FAX box to create space for new FAX receptions.
Why can't I access the Kyocera Print Server IB-51's Web page?
If you cannot access the IB-51's Web page, first, ensure the IB-51 wireless LAN settings are correct. Verify that you've entered the correct IP address; if unsure, ask your network administrator to confirm the IB-51's IP address configuration. If your web browser uses a proxy server, check the proxy settings (refer to your web browser's Help for details). Also, confirm that the administrator hasn't set up an IP Filter function, and if so, access the IB-51's Web page from an approved IP address. Finally, ensure your web browser version is supported by the IB-51's Web page.
Why Kyocera Fax Machine cannot use polling reception?
If your Kyocera Fax Machine cannot use polling reception, ensure polling transmission is being used correctly on the sending machine. Check with the recipient.
What to do if Kyocera Fax Machine Job Accounting restriction exceeded?
The printing count exceeded the acceptable count restricted by Job Accounting. Cannot print any more. The job is canceled. Press [End].
Why Kyocera Fax Machine cannot receive 2 in 1 reception?
If your Kyocera Fax Machine cannot receive 2 in 1 reception, cancel the duplex printing.
Why Kyocera Fax Machine cannot use sub address bulletin board communication?
If your Kyocera Fax Machine cannot use sub address bulletin board communication, it might be because the other party’s fax machine does not have the same sort of sub address bulletin board communication function. Check with the recipient. Also, verify that the entered sub address or sub address password is correct; if your entry is correct, check with the recipient.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 600 x 600 DPI |
| Duplex printing mode | Auto |
| Time to first page (black, normal) | 5.5 s |
| Time to first page (color, normal) | 7.3 s |
| Print speed (black, normal quality, A4/US Letter) | 30 ppm |
| Print speed (color, normal quality, A4/US Letter) | 15 ppm |
| Copier resize | 25 - 400 % |
| Maximum number of copies | 999 copies |
| Scan to | E-mail, FTP, USB |
| Maximum scan area | A3 (297 x 420) mm |
| Scan speed (color) | 100 ppm |
| Image formats supported | JPG, TIF |
| Document formats supported | |
| Faxing | No |
| Maximum duty cycle | - pages per month |
| Page description languages | PCL 5c, PCL 6, PCL XL |
| Paper input type | Paper tray |
| Total input capacity | 1150 sheets |
| Total output capacity | 250 sheets |
| Maximum input capacity | 7150 sheets |
| Multi-Purpose tray input capacity | 150 sheets |
| Maximum print size | 216 x 297 mm |
| Paper tray media types | Plain paper |
| Paper tray media weight | 60 - 220 g/m² |
| ISO A-series sizes (A0...A9) | A3, A4 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 300 g/m² |
| Display | LCD |
| Control type | Touch |
| Product color | Black |
| Market positioning | Business |
| Standard interfaces | Ethernet, USB 2.0 |
| USB 2.0 ports quantity | 2 |
| Mobile printing technologies | - |
| Processor model | P1022 |
| Processor family | PMC-Sierra |
| Processor frequency | 800 MHz |
| Internal storage capacity | 160 GB |
| Sound pressure level (printing) | 48.5 dB |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (PowerSave) | 1.8 W |
| Power consumption (average operating) | - W |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 767 mm |
|---|---|
| Width | 668 mm |
| Height | 747 mm |
To Next Page