Kyocera KM-2050 User Manual (English)

Other manuals for Kyocera KM-2050

Basic Operation Guide140 pages

Service Manual280 pages

Supplementary Guide104 pages

Manual36 pages

Online Manual108 pages

Operation Guide64 pages

User Manual39 pages

Quick Start Guide9 pages

Questions and Answers:

K
Kevin DanielsJul 26, 2025
Why is Kyocera Software not discovering the printing system?
- J
  Jennifer LarsenJul 26, 2025
  The printing system might be turned off, so turn it on and try again. It could also be removed from the network, so ensure it's connected. If the system is currently printing, wait until it's finished and then try searching again. It is also possible that the TCP/IP settings on your PC are not configured properly, in that case contact your network administrator. Depending on the network router configuration, a printing system may be undetectable. In some rare cases, heavy network traffic may prevent this application from detecting the printing systems, so try again later or contact your network administrator.
H
Henry ChangAug 5, 2025
What to do if Kyocera Software application does not start?
- S
  Sandra SteinAug 5, 2025
  If the Kyocera Software application doesn't start, it could be due to several reasons. First, your PC might not meet the necessary system requirements; in this case, consider upgrading your PC. Another possibility is low memory; try closing any unnecessary applications. Also, ensure that you are not trying to run two instances of the application simultaneously, as this is not supported.
R
Richard GonzalezAug 15, 2025
Why does Kyocera KM-2050 Software fail to obtain account or printing system information?
- A
  alexanderjeffreyAug 15, 2025
  The application might fail to obtain account or printing system information if the printing system is turned off; in this case, turn it on. Another reason could be that the printing system has been removed from the network; connect it to the network. Also, if the printing system is currently printing a document, wait until the operation is complete before trying again.

Kyocera KM-2050 Specifications

General

Print Speed	20 ppm
Resolution	600 x 600 dpi
Output Capacity	250 sheets
Duplex Printing	Manual
Memory	32 MB
Interface	USB 2.0, Parallel
Category	Multifunction Printer
Type	Monochrome Laser
Input Capacity	300 sheets
Operating Systems Supported	Windows, Mac OS