Kyocera FS C5015N - Color LED Printer User Manual (English)

Other manuals for Kyocera FS C5015N - Color LED Printer

Questions and Answers:

L
Laura GreenJul 26, 2025
Why is Kyocera FS C5015N - Color LED Printer not discovering the printing system?
- H
  hodgeedwardJul 26, 2025
  The printing system might be turned off, so turn it on and try again. It could also be removed from the network, so ensure it's connected. If the system is currently printing, wait until it's finished and then try searching again. It is also possible that the TCP/IP settings on your PC are not configured properly, in that case contact your network administrator. Depending on the network router configuration, a printing system may be undetectable. In some rare cases, heavy network traffic may prevent this application from detecting the printing systems, so try again later or contact your network administrator.
R
rmaddoxAug 4, 2025
What to do if Kyocera FS C5015N - Color LED Printer application does not start?
- E
  Edward SmithAug 4, 2025
  If the Kyocera Software application doesn't start, it could be due to several reasons. First, your PC might not meet the necessary system requirements; in this case, consider upgrading your PC. Another possibility is low memory; try closing any unnecessary applications. Also, ensure that you are not trying to run two instances of the application simultaneously, as this is not supported.
C
Caroline ReedAug 16, 2025
Why does Kyocera FS C5015N - Color LED Printer Software fail to obtain account or printing system information?
- V
  Vicki YoderAug 16, 2025
  The application might fail to obtain account or printing system information if the printing system is turned off; in this case, turn it on. Another reason could be that the printing system has been removed from the network; connect it to the network. Also, if the printing system is currently printing a document, wait until the operation is complete before trying again.

Kyocera FS C5015N - Color LED Printer Specifications

General

Category	Software
Printer Type	Color LED Printer
Model	FS C5015N
Print Technology	LED
Print Resolution	600 x 600 dpi
Maximum Resolution	9600 x 600 dpi
Operating Systems Supported	Windows, Mac OS, Linux
First Print Out Time (Color)	13 seconds
Standard Memory	64 MB
Paper Capacity (Standard)	250 sheets
Monthly Duty Cycle	30000 pages
Connectivity	Ethernet, USB
Paper Sizes Supported	A4, A5, B5, Letter, Legal
Interface	Ethernet, USB

Summary

Legal Notes

Regarding Trademarks

Models Supported by the KX Printer Driver

Chapter 1 Installation

Express Installation

Instructions for installing the KX driver using the Express mode.

Custom Installation

Steps for custom installation, allowing selection of packages and ports.

Installing Optional Components

How to install additional components to expand driver functionality.

Installing using the Add Printer Wizard

Procedure for installing the driver using the Windows Add Printer Wizard.

Chapter 2 Printer Properties

Accessing Printer Properties

Steps to access and open the Printer Properties dialog box.

Installing Optional Devices

How to install and configure optional devices for the printer.

Auto Configure

Detecting and configuring installed printer devices automatically.

User Settings

Configuring user-specific settings like identification and language.

Page Description Language (PDL)

Understanding and selecting the Page Description Language for printing.

Administrator Settings

Configuring administrative settings like user login and job accounting.

Compatibility Settings

Ensuring compatibility with older drivers and media sources.

Chapter 3 Printing Basics

Basic Printing Tasks

Steps for performing basic printing tasks from applications.

Custom Paper Sizes

Procedure for defining and using custom paper sizes.

Duplex Printing

How to enable and use the duplex printing option for two-sided printing.

Reverse Order Printing

Printing pages in reverse order, from last to first.

Collating Modes

Specifying how printed documents are stacked in output trays.

Chapter 4 Layout

Booklet

Printing multi-page documents in a book format, folded and stapled.

Multiple Pages Per Sheet

Printing multiple document pages onto a single sheet of paper.

Poster

Printing large banners by assembling multiple sheets.

Scaling

Increasing or decreasing the print size of documents.

Chapter 5 Finishing

Finishing Edge

Aligning sides of different page sizes for finishing.

Staple

Binding multiple document pages together with staples.

Punch

Placing round hole punches in the margin of printed pages.

Separation

Physically separating document copies in the finishing tray.

Chapter 6 Imaging

Print Quality

Adjusting print quality settings like resolution and refinement.

Fonts

Specifying how TrueType fonts are sent to the printer for optimal output.

Graphics

Configuring settings for graphics processing and output.

Halftone Screen

Adjusting halftone screen settings for grayscale images.

Grayscale

Adjusting brightness and contrast for graphics and text.

Chapter 7 Publishing

Printing with Covers

Adding front or back covers to documents with custom paper.

Page Insert

Inserting blank or preprinted pages into a document.

Transparency Interleaving

Inserting pages between transparencies to protect them.

Chapter 8 Job

Job Storage (e-MPS)

Storing print jobs on the hard disk for later printing.

Custom Box

Creating and using custom boxes for saving print jobs.

Quick Copy

Printing all copies and saving the job for later reprint.

Proof and Hold

Printing one copy for proofing and saving remaining copies.

Private Print

Saving secure print jobs with an access code for later printing.

Job Name

Selecting or creating names for print jobs for easier identification.

Chapter 9 Advanced

Prologue/Epilogue

Inserting PRESCRIBE commands into print jobs.

Watermark

Adding semitransparent text to the background of a document.

Security Watermark

Adding invisible watermarks visible only on photocopies.

PrintID Tracker

Embedding user and job info to trace sensitive documents.

Chapter 10 Profile

Add Profile

Creating new printer driver setting profiles.

Edit Profile

Modifying existing saved printer driver profiles.

Delete Profile

Removing saved printer driver profiles.

Import and Export Profile

Sharing profiles by exporting and importing them.

Related product manuals

Kyocera FS-1135MFP

20 pages

Kyocera FS-1035MFP/DP

86 pages

Kyocera ECOSYS FS-3540MFP

352 pages

Kyocera ECOSYS FS-3640MFP