Why Kyocera Fax Machine cannot use the remote switching function?
If your Kyocera Fax Machine cannot use the remote switching function: 1. If a pulse line is used, some phones may transmit tone signals using buttons. Refer to the operation manual of your phone set. 2. Check if the remote switching number is correct (Default: 55). 3. Ensure you press the remote switching number twice slowly.
What to do if Kyocera Fax Machine cannot send document?
If your Kyocera Fax Machine cannot send a document, make sure the modular cord is correctly connected. If a 'Send error' is displayed, address the cause of the error and try sending again. Also, check if the TX (transmission) restriction is activated and cancel it if necessary.
Why Kyocera Fax Machine cannot receive document?
If your Kyocera Fax Machine cannot receive a document, ensure the modular cord is properly connected. If a 'Communication error' is displayed, address the cause of the error and ask the sender to retry. Also, verify whether the RX (reception) restriction is activated and cancel it if needed.
What to do if Kyocera Fax Machine cannot perform memory reception?
If your Kyocera Fax Machine cannot perform memory reception, receive after the memory has free space, or create free space in the memory.
What to do if Kyocera Fax Machine FAX box limit exceeded?
If the FAX box limit is exceeded on your Kyocera Fax Machine, press [OK] and delete documents from the FAX box to create space for new FAX receptions.
Why Kyocera Fax Machine cannot perform sub address transmission?
If your Kyocera Fax Machine cannot perform sub address transmission, it may be because the recipient fax machine does not have a sub address transmission feature. Sub address transmission cannot be performed unless the recipient fax machine has a similar sub address transmission feature. Also, verify that the entered sub address or sub address password is identical to the sub address or sub address password registered in the recipient fax machine; if your entry is correct, check with the recipient. Finally, free space must be available in the memory of the recipient fax machine, so check with the recipient.
Why Kyocera Fax Machine cannot use polling reception?
If your Kyocera Fax Machine cannot use polling reception, ensure polling transmission is being used correctly on the sending machine. Check with the recipient.
What to do if Kyocera Fax Machine Job Accounting restriction exceeded?
The printing count exceeded the acceptable count restricted by Job Accounting. Cannot print any more. The job is canceled. Press [End].
Why Kyocera Fax Machine cannot receive 2 in 1 reception?
If your Kyocera Fax Machine cannot receive 2 in 1 reception, cancel the duplex printing.
Why Kyocera Fax Machine cannot use sub address bulletin board communication?
If your Kyocera Fax Machine cannot use sub address bulletin board communication, it might be because the other party’s fax machine does not have the same sort of sub address bulletin board communication function. Check with the recipient. Also, verify that the entered sub address or sub address password is correct; if your entry is correct, check with the recipient.
To Next Page
General