10-51
Troubleshooting > Adjustment/Maintenance
4
Perform the color registration.
1 As shown in the illustration, place the printed side down on the platen with the edge with
the arrows toward the back.
2 Select [Start] to scan the chart.
When scanning is finished, color printing position correction starts.
3 When color printing position correction ends, select [OK].
Manual Correction
1
Load paper.
2
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > "Color Registration" [Next] >
"Manual" [Next]
• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan the paper before loading it in the
cassette.
Loading in Cassette 1
(page 3-4)
• Before loading the paper, be sure that it is not curled or folded. Paper that is curled
or folded may cause paper jams.
• Ensure that the loaded paper does not exceed the level indicator (see illustration
above).
• If paper is loaded without adjusting the paper length guide and paper width guide,
the paper may skew or become jammed.
To Next Page
Loading...
