How to fix Kyocera TASKalfa 420i All in One Printer machine failure?
If your Kyocera All in One Printer is showing a machine failure message, try turning the main power switch off and on, or unplug the power cord and plug it in again. If the message persists, make a note of the error code, turn the main power switch off, unplug the power cord, and call your service representative.
Why Kyocera TASKalfa 420i cannot send document?
If your Kyocera All in One Printer cannot send a document, make sure the modular cord is correctly connected. If a send error is displayed, identify the cause of the error and try sending again. Also, verify whether TX (transmission) restriction is activated and, if so, cancel the TX restriction.
Why Kyocera All in One Printer cannot receive document?
If your Kyocera All in One Printer cannot receive a document, first check that the modular cord is correctly connected. If a communication error is displayed, address the cause of the error and ask the sender to retry. Additionally, check if RX (reception) restriction is activated and, if it is, cancel the RX restriction.
Why Kyocera All in One Printer has no print output after reception?
If there is no print output after reception on your Kyocera All in One Printer, check if memory forwarding is activated and verify the forwarding destination.
What to do if Kyocera All in One Printer says to add paper?
If your Kyocera All in One Printer displays this message, it means the indicated cassette or MP tray is out of paper. Add paper of the same size as indicated. If a specific type of printing paper is specified, the necessary paper types will also be displayed. To use a different paper source, select the desired paper source and press [Continue]. You can also press [MP Tray Setting] to change the paper size/type of the MP tray. Also, make sure that the cassette is securely loaded; remove it and reload it completely.
What to do if Kyocera TASKalfa 420i says the phone receiver is off the hook?
If your Kyocera All in One Printer displays this message, it means the phone connected to the machine is off the hook. Simply hang up the handset.
What to do if Kyocera All in One Printer displays 'FAX box limit exceeded'?
If the FAX Box limit is exceeded on your Kyocera All in One Printer, it means the FAX Box capacity is full with document data. Press [End] to cancel the job. To proceed, either print or delete the data in the FAX Box, and then try the job again.
What to do if Kyocera TASKalfa 420i displays 'Job Accounting restriction exceeded'?
If your Kyocera All in One Printer indicates that the Job Accounting restriction has been exceeded, it means the number of pages used has surpassed the preset limit. No further operation is possible. Press [End] to cancel the job. To continue, reset the limit for paper use and try the job again.
Why Kyocera TASKalfa 420i cannot perform memory reception?
If your Kyocera All in One Printer cannot perform memory reception, it is likely due to insufficient free space in the memory. To resolve this, either free up memory space or receive the document after the memory has free space.
Why Kyocera All in One Printer cannot perform broadcast transmission?
If your Kyocera All in One Printer cannot perform broadcast transmission, it's likely because there isn't enough free space in the memory. Try again after freeing up memory, or create free space in the memory.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 42 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 150, 000 pages |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Functions | Print, Copy, Scan |
| Duplex Printing | Yes |
| Connectivity | Ethernet |
To Next Page