Need help?Do you have a question about the KYORITSU 1009 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Continuity Check | Yes |
| Diode Test | Yes |
| Measurement Category | CAT III 600V |
| AC Voltage Range | 4V/40V/400V/600V |
| DC Current Range | 400μA/4000μA/40mA/400mA |
| AC Current Range | 400μA/4000μA/40mA/400mA |
| Capacitance Range | 40nF/400nF/4μF/40μF |
| Temperature | Not available |
| Display | 4000 count |
| Safety Standards | IEC 61010-1 |
| Power Supply | 2 x AA batteries |
| DC Voltage Range | 400.0mV/4.000/40.00/400.0/600V |
Defines DANGER, WARNING, and CAUTION levels for safe instrument operation.
Warns about high voltage, flammable gases, and wet conditions to prevent electrical shock.
Advises against using damaged instruments or making unauthorized modifications.
Outlines environmental, cleaning, and measurement time limits for safe use.
Explains the meaning of various symbols used in the manual and on the instrument.
Defines electrical measurement categories (CAT II, CAT III) for safety.
Details the measuring ranges and accuracy specifications for various functions.
Lists the international safety and EMC standards the instrument complies with.
Specifies the conditions for optimal and safe instrument operation.
Covers dimensions, weight, power source, accessories, and fuse types.
Provides instructions for measuring DC and AC voltage accurately.
Details the procedures for measuring DC current up to 10A.
Details the procedures for measuring AC current up to 10A.
Guides for measuring resistance, checking diodes, and continuity.
Provides step-by-step instructions for measuring capacitance values.
Instructions for measuring signal frequency and DUTY cycle.
Explains how the SELECT key changes measurement modes for current and resistance functions.
Describes how the RESET key restores initial conditions and releases settings.
Details manual range selection and switching to auto-ranging.
Explains the relative measurement function for comparing values.
Guides on how to hold and release displayed measurement values.
Explains how to measure frequency and duty cycle.
Step-by-step guide for safely replacing the instrument's batteries.
Instructions for safely replacing internal fuses in the instrument.
To Next Page
