KYORITSU 6010A - Overload protection; Mains Voltage Indication; Symbols used on the instrument

— 8 —
is updated approximately five times per second.
Overload protection The continuity test circuit is protected by a 0.5 A
600 V fast acting（HRC）ceramic fuse mounted in
the battery compartment, where a spare fuse is
also stored.
The insulation resistance test circuit is protected by
a resistor against 600 V AC for 10 seconds.
Mains Voltage Indication On connecting test leads to the circuit under test
on Loop and RCD ranges, the LCD reads V-PE.
Sign "V-PE Lo" or "V-PE Hi" is also shown when
the voltage is 100V or less, or 260V or greater
respectively.

Equipment protected throughout by DOUBLE
INSULATION or REINFORCED INSULATION.
Caution, risk of electric shock.
# Caution（refer to accompanying instruction
manual）
.
Symbols used on the
instrument
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com