—
15
—
Fig 7
4． If the mains warning lamp lights and/or the buzzer sounds DO NOT PRESS
THE TEST BUTTON but disconnect the instrument from the circuit. Make
the circuit dead before proceeding.
Fig 8
5． Press the test button when the display will show the insulation resistance of
the circuit or the appliance to which the instrument is connected.
6． Note that if the circuit resistance is greater than 20MΩthe instrument will
automatically range to the 200MΩreading.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
