10
Please the Charging Base on the flat surface against the wall, then connect the Power
Adapter into the base and a socket at room. Remove all objects within approximately a
1-2m radius of the base.
Notes:
1. Ensure the base is lowered, which is indicated by a solid white Power Indicator on
it.
2. Place the Charging Base where the Cybovac can easily access.
3. Always keep the Charging Base connecting to power to avoid that the robot can´t
find the Charging Base when its battery gets low.
4. It´s recommended to tidy any surplus power cord into the Storage Space on the
back of the base, which may help robot reduce the possibility of getting stuck.
Please fully charged your robot before your first use. Manually align the Charging
Contacts on the bottom of the robot with those on the Charging Base.
To Next Page
Loading...