Kyvol Cybovac E31 - MAINTENANCE AND CARE; Component Cleaning & Replacement

21
Step 4:
Peel off the other side of the 3M Adhesive Pads, the utilize them to affix the Magnetic
Strip on the floor to make a barrier.
Tips:
1. If the strips is rolled up, please remove and affix it again on the floor, otherwise, it
may not work effectively. It is not recommended to use strip on the carpet.
2. Make sure the strip is affixed on the same surface level as the robot´s.
3. Keep the strip away form anything that can emit excessive heat.
MAINTENANCE AND CARE
To optimize the performance of your robot, we recommend to perform a regular
maintenance and cleaning from some parts in the robot.
CLEANING AND REPLACEMENT FREQUENCY
Part
Cleaning Frequency
Replacement Frequency
Dust Bin
After each use
/
Filter
Once per week (Twice per
week if you have pets)
Every 2 months
Side Brushes
Once per week
Every 3-6 months or when
it is worn visibly
Main Brush
Once every 2 weeks
Every 6-12 months or
when it is worn visibly
Brush Guard
Once per month
/
Sensors
Once per month
/