COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
FA2100CVR
Page 23
Nov. 01/98
Description and Operation
23–70–04
5. INSTALLATION
The information provided in this section is for general knowledge use only. For authorized
detailed installation instructions, refer to the Model FA2100CVR Installation and Operation
Instruction Manual, p/n: 165E1846-00.
The Model FA2100CVR is an environmentally hardened unit housed in an ARINC 404A
1/2-ATR short box painted international orange. The FA2100 does not require external
shock mounting for installation into the aircraft. However, the Model FA2100CVR requires
mounting in an approved mount system for installation into the aircraft. FA2100CVR
Mount, Part Number 178E0919–00, is a mount used for this purpose. The FA2100CVR is
fully compatible with ARINC Specification 757 and is directly interchangeable with all ex-
isting cockpit voice recorder installations.
The FA2100CVR is connected to its control unit or preamplifier module by means of the
aircraft wiring. Refer to Figure 8 and Figure 10 for the Standard ARINC−757 and GACVR
Interface Wiring Diagrams used when installing the FA2100CVR into an aircraft.
The Con-
trol Unit & Microphone information can be found in CMM, ATA No. 23−70−05, p/n:
165E1747−00 for ED−56A installations or the FA2100CVR Installation & Operation
manual, p/n: 165E1846−00.
Dec. 01/0
Rev. 07 Page 23
To Next Page
Loading...
