EasyManua.ls Logo

La Cornue 110 Induction - Storage Drawer

La Cornue 110 Induction
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Storage Drawer
The bottom drawer is for storing oven trays and other
cooking utensils.
It can get very warm so do not store anything in it that may
melt or catch re. Never store ammable materials in the
drawer. This includes paper, plastic and cloth items, such as
cookbooks, plastic ware and towels, as well as ammable
liquids. Do not store explosives, such as aerosol cans, on or
near the appliance.
Flammable materials may explode and result in re or
property damage.
The drawer can be removed completely for cleaning, etc.
To Remove the Storage Drawer
1. Note: To avoid exterior damage to the storage drawer.
Ensure a soft cushioned mat is placed on the oor and
covers the width and depth of the storage drawer.
2. Slide the storage drawer out until it stops.
3. Unscrew the two fasteners and remove the screw
washers from either side of the storage drawer runner
brackets (Fig.2.24).
To Fit the Storage Drawer
1. Note: To avoid exterior damage to the storage drawer.
Ensure a soft cushioned mat is placed on the oor and
covers the width and depth of the storage drawer.
2. Align the two holes on either side of the storage drawer
with the runner brackets (Fig.2.24).
3. Fasten the two fasteners and screws washers on either
side of the storage drawer.
4. Close drawer and check the alignment. Adjust storage
drawer position accordingly.
5. Check the alignment is correct and ensure all fasteners
are fully tightened.
Fig.2.24

Related product manuals