Do you have a question about the La Crosse Technology 302-604B and is the answer not in the manual?
Brand | La Crosse Technology |
---|---|
Model | 302-604B |
Category | Weather Station |
Language | English |
Procedure to set the time by pressing SET and SWITCH buttons to adjust Hours and Minutes.
The displayed numbers on the station are 1.18 inches tall.
The station is powered by a single CR2032 battery.
Switch between Fahrenheit and Celsius by pressing the SET button.
Press MAX/MIN button to view maximum and minimum temperature/humidity readings.
Hold SET button in MAX/MIN mode to clear recorded readings, displaying dashes.
Press the SWITCH button to display Temperature or Humidity in larger numbers.
Smiley face appears for 40%-60% humidity, indicating comfortable indoor climate.
This station does not have a backlight; a/c power is typically required for backlights.
Likely power issue. Remove battery, press buttons 20 times, leave unpowered for 1-2 hours.
Check for leaking battery or battery age over 12 months. Use reputable brands.
Avoid heat sources. Place near thermostat for 2 hours; readings should be within 2 degrees.
Generally a power issue. Follow reset steps: remove battery, press buttons 20 times, repower.
Check placement, sunlight exposure. Follow reset steps for power-related dimming.
Check for protective plastic film on screen. Follow reset steps if issue persists.
Check for protective plastic film. Follow reset steps for power or display issues.
Remove battery, press buttons 20 times, leave unpowered for 1-2 hours, then reinsert battery.
Remove battery, discharge, leave unpowered for 10 mins, then insert fresh alkaline battery.
Use the foldout table stand located on the back for placement.