La Crosse Technology, Ltd. Page 1
The links below will work in most PDF viewers and link to the topic area by clicking the
link. We recommend Adobe Reader version 10 or greater available at:
http://get.adobe.com/reader
CONTENTS
........................................................................................................................ 1
........................................................................................................................................ 1
................................................................................................................ 1
.................................................................................................................. 1
................................................................................................................................ 2
12-Hour Time Format ............................................................................................................... 2
Set Time Alarm ........................................................................................................................ 2
Manually Set Time: Program Menu .......................................................................................... 3
................................................................................................................................... 3
USB Charge Port ..................................................................................................................... 4
Backup Battery ........................................................................................................................ 4
Clock Has Distorted Display ..................................................................................................... 4
• This clocks powered by a 5.0 volt AC power adapter
• 1 CR2032 battery backup, included in the package
1. Remove battery and AC power from the clock.
2. Press one of the buttons on the clock at least 20 times to clear all memory. Verify that
the clock is blank before proceeding.
3. Let the clock sit without power out for at least 10 minutes.
4. Insert the AC power cord in the clock.
Press the button to select High or Low backlight.
Rotate the Dimmer Wheel on the side of your clock to adjust the brightness of the Low
setting.
To Next Page
Need help?
General
