La Crosse Technology, Ltd Page 6
Phone/ Watch will not Charge
• Be sure your charge cord is attached correctly.
• For Wireless Charging be sure your phone has Qi technology. Place correctly in the
cradle.
Display Modes
• Tap the MODE button to select one Display Mode, or cycle through them all every 5
seconds.
o Choose Time, Date, Indoor Temperature, Indoor Humidity, or Cycle through all
Modes
o When outdoor sensor is added: Choose Display mode should be time, date, In-temp,
In-humid, Out-temp, Out-humid and cycle. Default is time.
• The Color Bar above the time will indicate the Display Mode.
• The Circling Arrow indicates the clock will cycle through all display modes.
• To stop cycling through all modes, Tap the MODE button until the arrow disappears.
Clock will stay on selection.
Alarm Clock is dim
• Tap the SNOOZE/LIGHT button to determine if the LCD backlight is on HIGH or LOW.
• Clock must operate on Power cord for backlight to stay on.
Smart Watch Stand
The Smart Watch Stand can be stored in the integrated storage compartment on the
bottom of the clock when not in use.
How to attach the Smart Watch Stand
How to store the Smart Watch Stand
1 2 3
2 3 41
The open design fits
AppleWatch charger
(not included)
To Next Page
Loading...
Need help?
General
