La Crosse Technology, Ltd Page 8
Indoor:
• Mount the Remote Sensor indoors to monitor high mold risk areas like in a crawl space
or a basement.
Indoor or Outdoor:
• Mount remote temperature sensor vertically.
• Avoid more than one wall between the remote sensor and the atomic clock.
• The maximum transmitting range in open air is over 330 feet (100 meters).
• Obstacles such as walls, windows, stucco, concrete and large metal objects can
reduce the range.
• Do not mount near electrical wires, transmitting antennas or other items that will
interfere with the signal.
• RF (radio frequency) signals do not travel well through moisture or dirt.
MOUNT
Option 1:
• Install one mounting screw (not included) into a wall.
• Place the remote sensor onto the screw (hanging hole on the backside).
• Gently pull down to lock the screw in place.
Option 2:
• Insert the mounting screw through the front of the remote sensor and into the wall.
• Tighten the screw to snug (do not over tighten).
To Previous Page
Loading...
