6 | Page
Settings order:
•Beep ON/OFF
•12H/24H Time
•Hour
•Minutes
•Year
•Month
•Date
•Temperature Fahrenheit/Celsius
Full Program Menu:
1. Hold the SET button for 3 seconds to enter settings. BEEP SOUND ON will show. Press
and release the PLUS (+) or MINUS (-) button if you want the Beep sound OFF.
2. Press and release the SET button to confirm and move to select 12/24 hour time format.
12/24 TIME FORMAT will show. Press and release the PLUS (+) or MINUS (-) button if
you want 24 hour time format.
3. Press and release the SET button to confirm and move to the hour. 12: and SET HOUR
will show. Press and release the PLUS (+) or MINUS (-) button to adjust the hour.
4. Press and release the SET button to confirm and move to the minutes. :00 and MINUTES
will show. Press and release the PLUS (+) or MINUS (-) button to adjust the minutes.
5. Press and release the SET button to confirm and move to the year. 2017 and SET YEAR
will show. Press and release the PLUS (+) or MINUS (-) button to adjust the year.
6. Press and release the SET button to confirm and move to the month. JANUARY and SET
MONTH will show. Press and release the PLUS (+) or MINUS (-) button to adjust the
month.
7. Press and release the SET button to confirm and move to the date. 01 and SET DATE will
show. Press and release the PLUS (+) or MINUS (-) button to adjust the date.
8. Press and release the SET button to confirm and move to select Fahrenheit or Celsius.
TEMP FAHRENHEIT will show. Press and release the PLUS (+) or MINUS (-) button to
select Celsius (°C).
WEATHER ALARM CLOCK MESSAGES
WHY DOES “LOST WIFI”, ETC., SHOW ON MY ALARM CLOCK?
When operating as a standalone alarm clock, you will occasionally see the words SEE APP
TO CONNECT or LOST WIFI.
• SEE APP TO CONNECT appears at start up is a prompt to connect to the La Crosse View™
app.
• LOST WIFI again refers to your alarm clock searching for a WIFI connection to connect to
the La Crosse View™ app. You alarm clock has found a Wi-Fi service and is awaiting a
password.
• These statements should only flash for a few minutes then disappear.
To Next Page
Loading...
Need help?
General
