GET THE MOST ACCURATE READINGS POSSIBLE
STEP 3: MOUNTING BASICS
At this time, all of your sensor information should be displayed on your station.
Here are a few quick tips for mounting your sensors:
Note: For detailed mounting instructions, please review the full manual.
Keep out of direct sunlight & ensure the sensor is well-ventilated.
Be sure to mount your sensor vertically to all moisture to drain out properly.
We recommend mounting under a deck or eave facing north.
*Only When Connected
STATION OVERVIEW
IMPORTANT ICONS & HELPFUL TIPS
NOTE: Basic button functions are printed on the back of the station.
This icon measures
your Wi-Fi connection
strength
When this appears,
you’re now receiving
enhanced NWS info
Individual station/sensor
indicators let you know
which batteries to replace
The bars let you know
the station & sensor
are connected
LCD ICONS
BUTTONS LOCATED ON TOP OF STATION
NWS FORECAST* LOW BATTERY SENSOR CONNECTIONWi-Fi INDICATOR*
Press and hold the + & - buttons
together to look for the Wi-Fi Signal.
Press and hold ALERTS & LIGHT
buttons together to start over
WI-FI SEARCH
FACTORY RESET
5
To Next Page
Loading...
Need help?
General
