07 08
Natural Light Alarm Setting the Light Alarm
ALARMS ALARMS
Setting the Light Alarm
3. Your Light Alarm is now activated, indicated
by the words LIGHT ALARM on the LCD.
1. Hold the button on the back of the clock
to enter the Light Alarm Settings Menu.
Activating & Deactivating the Light Alarm
Gradual Wake Up
2. Use the +/- buttons to set your desired time.
Press to confirm.
1.
2.
Press the button to view your Light Alarm
time and activate/deactivate the alarm.
The Light Alarm will begin 30 minutes before your set alarm time. The light will
gradually increase in intensity until reaching full brightness at your set alarm time.
The light will remain on and at full power until a button is pressed.
Example:
The words LIGHT ALARM appear on the
LCD when the alarm is active.
The Soluna Light Alarm Clock is
equipped with a glowing Light Alarm
that simulates the sunrise. Use the
Light Alarm to wake up peacefully
and help reset your circadian rhythm.
Note: There is no sound with the Light Alarm. If a sound alarm is wanted, you will
need to activate the Melody Sound Alarm. You can use the light and sound alarms
together or at separate times.
Note: If you set an alarm for less than 30 minutes from the current time, the Light
Alarm will accelerate the brightness accordingly.
Based on 7:00am alarm time
To Next Page
Loading...
Need help?
General
