LIGHT MODES
How to Activate Guided Breathing Mode
1.
2.
3.
Tap the LIGHT button to toggle through the light modes. BREATHING will
appear on the LCD.
Use the +/- buttons to choose the glow color. Select from three options:
Energy, Warmth, or Calm.
There are 3 ways to confirm your selection and start the light mode. Either tap
SNOOZE, double-tap the LIGHT button, or simply wait 5 seconds. The Guided
Breathing Mode will now begin.
13
Guided Breathing Mode
The Guided Breathing Mode will walk you through a 10-minute deep breathing
exercise. Simply inhale and exhale as the colors change. To further assist you,
the LCD will also display your inhale and exhale times.
The breathing exercise will last a total of 10 minutes. Press the SNOOZE
button at any time to end the exercise.
Energy Warmth Calm
Use the +/- buttons to adjust the light’s brightness level.
LIGHT MODES
How to Activate Comfort Meter Mode
1.
2.
Tap the LIGHT button to toggle through the light modes. COMFORT will
appear on the LCD.
There are 3 ways to confirm your selection and start the light mode. Either tap
SNOOZE, double-tap the LIGHT button, or simply wait 5 seconds. The Comfort
Meter Mode will now begin.
14
Comfort Meter Mode
In the Comfort Meter Mode, the color changes according to the current indoor
humidity level, so you can monitor the comfort of your home at a quick glance.
76% to 83% RH 84% to 99% RH
1% to 25% RH 26% to 39% RH 40% to 75% RH
Use the +/- buttons
to adjust the light’s
brightness level.
To shut o the
light mode, tap the
SNOOZE button.
To Next Page
Loading...
Need help?
General
