La Crosse Technology TX141TH-BCH - Alert Configuration and Management; Setting Temperature;Humidity Alerts; Arming and Disarming Alerts; Active Alert Behavior

www.lacrossetechnology.com/support Page|3
SetIndoorandRemoteTemperatureAlerts
1. Holdthe ALERTS buttonfor3secondstoenter
alertsetmode.
2. Thetemperaturealertvaluewillblinkinsetmode.
3. Pressthe
-
or
+
buttonstoadjustthevalues.
4. Pressthe
ALERTS buttontoconfirm
5. Pressthe
- or + buttonstoarmordisarmtheAlertandmovetothe
nextalert.
Thealertsettingorder:
INDOORHUMIDITYHI
è
INDOORHUMIDITYLO
è
INDOORTEMPHI
èINDOORTEMPLO è OUTDOORHUMIDITYHI èOUTDOOR
HUMIDITYLO èOUTDOORTEMPHI èOUTDOORTEMPLO
Note: Whenusingmultiplesensors,pressthe + buttontoselectthe
channel(1,2,or3)beforeenteringAlertSetMode.
Pressthe ALERTS buttontoexit,orwait20secondswithoutpressing
buttonstoreturntonormaltimedisplay.
Arm/DisarmTemperature/HumidityAlerts
l Pressandreleasethe ALERTS buttontotogglebetweenthealerts:
INDOORHUMIDITY(HI/LO) èOUTDOORHUMIDITY(HI/LO) è
INDOORTEMP(HI/LO) èOUTDOORTEMP(HI/LO)
• Pressthe + buttontoarmthealert.
• Pressthe - buttontodisarmthealert.
•
TheHIorLOalerticonappearswhenarmed.
ActiveTemperatureAlert
• Beepsonceperminutewithflashingalerticon.
• Pressandreleasethe ALERTS buttontotogglebetweenthealerts.
•
Pressthe
-
buttontodisarmthealert.
AdjustBacklight
When using AC power:
• MustuseACpowerforaconstantbacklight.
• Pressthe LIGHT buttontoadjustthebacklight
(Bright/Dim/TurnOff)whenusingACpower.
WhenusingBatterypoweronly:
• Pressthe
LIGHT buttonfor10secondbacklight(willnotstayon).
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn