To Next PageTo Next Page
Need help?Do you have a question about the La Crosse Technology TX2000 Discovery and is the answer not in the manual?
General| Brand | La Crosse Technology |
|---|---|
| Model | TX2000 Discovery |
| Category | Weather Station |
| Display Type | LCD |
| Humidity Range | 10% to 99% |
| Power Source (Sensor) | 2 x AA batteries (not included) |
| Weight (Sensor) | 0.14 Lbs (64 g) (without batteries) |
Instructions for installing batteries in the remote sensor.
Instructions for installing batteries in the indoor station.
Lists the order and default values for various settings.
Guide to adjusting the display's contrast level.
Instructions to turn radio-controlled time reception on or off.
Details on automatically setting time via WWVB radio signal.
Steps for manually setting the device's time.
Instructions to switch between Fahrenheit and Celsius temperature units.
Information about an unused setting and how to exit it.
Explanation of how indoor temperature is displayed.
Explanation of how outdoor temperature is displayed, including multiple sensors.
Details on how the unit records minimum and maximum temperatures and dates.
Steps to view the recorded minimum and maximum indoor temperatures.
Steps to view the recorded minimum and maximum outdoor temperatures.
How to clear the recorded minimum and maximum temperature data.
Detailed steps for setting and activating alarm 1 and alarm 2.
How to use the snooze function and stop the alarm.
How to cycle through and display date, weekday, or alarm times.
Step-by-step guide for setting up multiple remote sensors.
How to view and manage data from multiple sensors.
Explains the two methods for mounting the remote temperature sensor.
Detailed instructions for mounting the sensor using screws.
Detailed instructions for mounting the sensor using adhesive tape.
Instructions for placing the station on its table stand.
Instructions for mounting the indoor station on a wall.
