WS6304 User Manual
Alarm ON/OFF
Press “ ” button can switch the display ALARM1 time or ALARM2 time, in the alarm1 or alarm2 display
mode, press the “▲” button to turn the alarm on or off.
The alarm 1 or alarm 2 turn on, the “ ” or “ ” icon is displayed, the alarm 1 or alarm 2 function is open, the
repeat of alarm icon at the same time is also displayed.
The alarm 1 or alarm 2 turn off, the“ ” or “ ” icon disappears, the alarm 1 or alarm 2 function is close.
During alarm viewing mode, Press the “ ” button to exit the setting mode directly.
F.Y.I.:
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm
will be repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is
heard.
Switching off the alarm signal
Press any button except the “ ” button to stop the alarm signal. It is not necessary to reactivate the
alarm. It switches itself automatically to the alarm time which has already been set.
Snooze function:
When the time is up to the alarm, press the “ ” button, the alarm signal stops, and enter the SNOOZE
mode. After the snooze time is counted, the alarm will ring again.
In snooze mode, press any buttons except the “ ” button or press the “ ” button and hold for
more than 2 seconds to exit the snooze mode.
F.Y.I.:
When the snooze function is set to OFF, when the time is up to the alarm, press the “ ” button does not
have this snooze function.
Lunar phases:
The Moon icon indicator of the Weather Station will also display 12 different Moon phase phases according
to the set calendar.
New
moon
Waxing half-moon Half-moon
Waxing full
moon
Full
moon
Waning full
moon
Half-moon
Waning half-moon
To Next Page
Loading...
Need help?
General
