Month (flashing)
2. Press the SET key to enter the minutes. The minute digits start flashing.
3. Use the MIN/MAX/+ key to set the minute.
4. Press again the SET key to confirm and enter the Calendar setting mode.
Note:
The unit will still try and receive the signal despite it being manually set. When it
does receive the signal, it will change the manually set time into the received time.
CALENDAR SETTING
The date default of the Temperature station is 1. 1. in the year 2008. Once the radio-
controlled time signals are received, the date is automatically updated. However, if
the signals are not received, the date can also be set manually:
1. The year digits will start flashing. Use the MIN/MAX/+ key to set the year
(2008 to 2029).
2. Press the SET key to enter the month (the month digit will be flashing). Use
MIN/MAX/+ key to adjust the month.
3. Then press the SET key to enter the day. Use MIN/MAX/+ key to adjust the
day.
Year (flashing)
Day (flashing)
To Next Page
Loading...
Need help?
General
