DIGITAL WALL CLOCK
with Indoor Temp and Calendar
QUICK START GUIDE
Model: WT-8002U
DC:050818
Full Manual can be found under the Support Tab here: http://bit.ly/WT-8002U
DIGITAL WALL CLOCK OVERVIEW POWER UP
1. Insert 1-AA battery into the clock.
2. Configure basic settings.
SETTINGS
• Hold the SET button to enter the Settings Menu.
• Press the +/HR or - ºF/ºC button to adjust values.
• Press the SET button to confirm and move to the
next item or exit.
Settings Menu Order:
• 12/24 Hour Time Format
• Hour
• Minutes
• Year
• Month
• Date
Note: The Weekday will set automatically as Year,
Month, and Date are set correctly.
FAHRENHEIT | CELSIUS
• Press the - ºF/ºC button to select Fahrenheit or
Celsius temperature display.
ALARM SETTING
• Hold the ALM button to enter Alarm Settings.
• Press the +/HR or - ºF/ºC button to adjust values.
• Press the ALM button to confirm and move to the
next item or exit.
ACTIVATE | DEACTIVATE ALARM
• Press the ALM button to activate or deactivate the
alarm. The Alarm Indicator will display when active.
Note: The alarm will automatically be activated after
setting a new alarm time.
SNOOZE
• When the alarm sounds, press the SNZ button to
silence the alarm for 5 minutes. The Alarm and
Snooze Indicators will flash.
• Press any button except SNZ to stop the alarm for
24 hours.
• This is a crescendo alarm that will sound for 120
seconds if not deactivated.
AM or PM
Indicator
Alarm &
Snooze
Indicators
Time Display
Month | Date
Display
Weekday
Display
Indoor
Temperature
Display
(°F/°C)
Mounting
Hole
Pull Out
Stand
Buttons
Battery
Compartment
Page | 2 Page | 3 Page | 4
To Next Page
Need help?
General
