WT-8005U www.lacrossetechnology.com/support Page | 2
IMPORTANT:
The clock will look for the Atomic time signal for 7 minutes when batteries
are first installed. Buttons will not function during the Atomic time
signal search.
Hold the WWVB SEARCH button for 3 seconds to stop the Atomic
signal search.
Manually set the time and time zone.
The clock will search for the Atomic time signal again after midnight.
Press WWVB SEARCH button anytime, to start an Atomic signal
search.
For information about Atomic Time, visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
Set Time, Date, 12/24 Hour
1. Press the SET button to enter time set mode, confirm
adjustments and move to next item.
2. Press the ▲ or ▼ buttons to adjust values.
Settings order:
1.12/24 Hour Format 2. Hour 3. Minutes 4. Year 5. Month 6. Date
7. Daylight Saving Indicator
Press SET to exit, or wait 30 seconds without pressing buttons to return
to the normal time display.
Time Zone/Temperature Units
Press the ZONE button to select your time zone.
o P = Pacific
o M = Mountain
o C = Central
o E = Eastern
Press the ºF/ºC button to switch from Fahrenheit to Celsius.
Set Alarm Time
Hold the ALARM button to set time alarm.
Press the ▲ or ▼ buttons to adjust values.
Press the ALARM button to confirm adjustments and
move to next item.
Setting order: 1. Hour 2. Minutes
Press ALARM to exit, or wait 30 seconds without pressing buttons to
return to the normal time display.