La Crosse Technology WT-8005U-W User Manual

WT-8005U www.lacrossetechnology.com/support Page | 3
Deactivate/Activate Alarm
 Press ALARM once to deactivate the alarm.
 The alarm icon will disappear.
 Press ALARM once to activate the alarm.
 The alarm icon will appear.
Snooze
 Press SNOOZE to silence an active alarm for 5 minutes.
 The alarm icon will flash.
This is a crescendo alarm that will sound for 120 seconds if not
deactivated. Press any button to stop the alarm for 24 hours.
Reset Button
 If the atomic clock display appears distorted or is not
responding to buttons, use a pen or paperclip to press
RESET one time.
 This will reset the atomic clock to default settings.
Specifications
Indoor:
Temperature Range:
14.1°F to +139.9°F (-9.9ºC to +59.9ºC)
Power:
Atomic clock
2-AA, IEC, LR6 batteries (not included)
Battery Life:
Atomic clock
Up to 24 months
Dimensions:
Atomic clock:
8.9” L x 1.2” W x 7.2” H
(226.06 L x 30.48W x 182.8 H mm)
Care and Maintenance
 Do not mix old and new batteries
 Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
 Always purchase the correct size and grade of battery most suitable for
intended use.
 Replace all batteries of a set at the same time.
 Clean the battery contacts and also those of the device prior to battery
installation.
 Ensure the batteries are installed with correct polarity (+and -).
 Remove batteries from equipment with is not to be used for an extended
period.
 Remove expired batteries promptly.
Alarm
Icon
SNOOZE

La Crosse Technology WT-8005U-W Specifications

General

Brand	La Crosse Technology
Model	WT-8005U-W
Category	Clock
Language	English