La Crosse Technology, Ltd Page 8
Activate/Deactivate Light Alarm
• The alarm is active when set. The words LIGHT ALARM will show on the display.
• Press the button once to deactivate. Alarm time will show for 3 seconds.
• Press button again to activate for the same time.
• The words will show when alarm is active. The words will not show when alarm is
deactivated.
Will the light always start 30 minutes before the Light Alarm?
• In the rare chance that the you set the light alarm, with less than 30 minutes before the
alarm time, the light brightness adjusts to the brightness level it should be at for the
time remaining before the alarm.
• This may cause you to see a “jump” in the light level when it adjusts.
Sound Alarm
The SOUND ALARM will wake you to gentle melody that will increase in loudness over a 5
minute period.
1. Hold the button to enter the Alarm Setting Mode. ALARM and the Hour will show.
Tap the button to adjust the hour.
2. Press the button, ALARM and the Minutes will show. Tap the button to adjust
the minutes.
3. Press the button to select Snooze time (5 minutes to 120 minutes). Tap the
button to select.
4. Press the button to exit.
5. The alarm is active when set.
To Next Page
Loading...
