© copyright 2006 12-273v2 LA GARD INC - A Member of The Kaba Group
3750-K Electronic Entry Device and Deadbolt Lock
INSTALLATION INSTRUCTIONS
The Quality System of LA GARD Inc. is ISO 9001 certified. In order to maintain this high quality standard and to ensure a problem
free application, please read this guide thoroughly before mounting the LPAUDIT.
SAFEGUARDS FOR MOUNTING
LA GARD recommends the following:
1 As soon as an electronic lock has been mounted, no more welding can be done on the safe.
2 Keep metal dust, filings, etc. away from the lock.
3 Never remove lock cover.
4 Never oil, grease, lubricate or paint the lock.
5 Keep cables away from sharp edges and moving parts.
6 Never carry Keypads or Locks by holding on to the cable.
7 Use ALKALINE batteries only. (LA GARD recommends Eveready™ or Duracell™)
Figure 2 Figure 3
1 3750-K Entry
[Comes with hardware pack that includes
mounting screws for entry, pin and spring and
bearing plate]
(
The pin and spring are for use with the Dual-Handed Swingbolt Lock
only. DO NOT use them with the Deadbolt or Springbolt style locks.)
2 3740-2/3040-DB/6040-DB Deadbolt Lock
[Comes with hardware pack that includes
mounting screws for lock]
Figure 1
1
2
Deadbolt Dimensional Drawing
To Next Page
Need help?
General
