39E Operating instructions
Page
1 / 8
──────────────────────────────────────────────────────────────
SW V1.01 11.09.2005
La Gard Latin America - 741 Shotgun Rd. – Sunrise Florida – 33351 – USA
Tel. +1 954 476 5574 – Fax. + 7 954 476 5576 – Email: info@lagardlat.com
Table of content
Table of content_____________________________________________________________1
Hardware description ________________________________________________________2
Keypad connector________________________________________________________2
TAG reader connection to serial adapter _______________________________________ 2
Alarm box connector______________________________________________________2
Silent alarm output ________________________________________________________ 2
Remote input_____________________________________________________________ 2
Solenoid / motor connector_________________________________________________2
Features ___________________________________________________________________3
Codes & users __________________________________________________________3
Time delay _____________________________________________________________3
Battery low warning ______________________________________________________3
Time penalty ____________________________________________________________3
Programmable features ___________________________________________________3
Audit __________________________________________________________________3
Lock states _____________________________________________________________4
Pre-setup mode___________________________________________________________ 4
Special procedures __________________________________________________________4
Setup process, to do list ___________________________________________________4
Factory reset procedure ___________________________________________________4
General procedures__________________________________________________________5
To enter manager or user code _____________________________________________5
To enter special function (manager or user)____________________________________5
Open procedures ____________________________________________________________5
To open (Standard mode)__________________________________________________5
To open (Time Delay override mode) _________________________________________5
To open (Dual code mode) _________________________________________________5
Special functions_________________________________________________________ ___6
To change code (special function #0) ___________6
To install or reinstate user (special function #1) ___________6
To disable user (special function #2) ___________6
To delete user (special function #3) ___________6
To get audit file (special function #7) ___________7
To check user status (special function #7b) __________7
To set mode and code length (special function #8) ___________8
To change time delay and open window values (special function #9) ___________8
To Next Page
Need help?
General
