To Next PageTo Next Page
How to confirm first installation on La Marzocco Coffee Maker?
To confirm the first installation on your La Marzocco Coffee Maker, press the ENTER button on group 1 keypad. This will initialize the CPU and boot the electronics.
What to do if La Marzocco FB/80 shows 'Corrupted Data'?
If your La Marzocco Coffee Maker displays 'Corrupted Data', it likely means the machine lost power without being properly shut down via the keypad and display. To resolve this, turn the machine off using the main switch to cycle the power. This should clear the error.
What to do if La Marzocco Coffee Maker displays 'Filling-up Alarm'?
If your La Marzocco Coffee Maker displays 'Filling-up Alarm', the CPU has shut down and turned off power to the machine. This is related to the 'Level Timeout' parameter. To reset this error, press the ON/OFF button.
What to do if La Marzocco FB/80 Coffee Maker displays 'Wrong Password'?
If you see 'Wrong Password' on your La Marzocco Coffee Maker, it means an incorrect password was entered. The display will automatically reset after 3 seconds, allowing you to try again.
What to do if La Marzocco Coffee Maker displays 'Steam Boiler Empty'?
If your La Marzocco Coffee Maker displays 'Steam Boiler Empty', the CPU has turned off power to the steam boiler heating element. To fix this, you need to repair the Safety Probe to restore the signal to the CPU.
Why does La Marzocco FB/80 Coffee Maker display 'Flowmeter Alarm'?
If the La Marzocco Coffee Maker displays 'Flowmeter Alarm', it could be due to several reasons: the coffee being packed too tightly, a blockage in the tubes, a malfunctioning water pump, a faulty valve, or a damaged flowmeter. It is suggested to call a service technician to fix this problem.
What to do if La Marzocco FB/80 Coffee Maker displays 'Steam Boiler Temperature'?
If your La Marzocco Coffee Maker shows 'Steam Boiler Temperature', contact an authorized service technician for repair. The CPU has turned off power to the steam boiler.
What to do if La Marzocco FB/80 Coffee Maker displays 'Coffee Boiler Temperature'?
If your La Marzocco Coffee Maker displays 'Coffee Boiler Temperature', call an authorized service technician to repair this fault. The CPU turns off power to the coffee boiler displayed, and the number on the display indicates the faulty boiler.
What to do if La Marzocco FB/80 Coffee Maker displays 'Autosteam 1 Temperature'?
If your La Marzocco Coffee Maker shows 'Autosteam 1 Temperature', it is suggested to call an authorized service technician to repair this fault. The number in the message indicates the faulty Autosteam assembly.
General| Type | Espresso Machine |
|---|---|
| Groups | 2 or 3 |
| Boiler Type | Dual Boiler |
| Voltage | 220-240 V |
| Group Type | Saturated |
| Boiler Material | Stainless Steel |
| Water Tank Capacity | 11 liters |
Key safety instructions, machine dimensions, features, and component identification.
Covers installation, water supply, electrical connections, and waste drain.
Details counter preparation, hole drilling, and required accessories.
Step-by-step guide to starting, heating, and initial brewing procedures.
Procedures for brewing coffee, portafilter usage, steaming milk, and dispensing hot water.
Procedures for cleaning brew groups, filters, nozzles, gigler, and water filter.
Scheduled maintenance tasks to ensure optimal performance and longevity.
Introduction to programming, display, keypad, and accessing modes.
Procedures for turning the espresso machine on and off safely.
User-level programming for water volume, temperature, cup heating, clock, and auto on/off.
Settings for display language, temperature correction, and boiler settings.
Configurations for filter alarms, steam boiler fill, and pressure regulation.
Settings for valves, boiler drain, safety test, and password assignment.
Adjustments for water volume, cup heating, doses, clock, and auto on/off.
Backflushing, error resolution, and EE model programming introduction.
