12
3. Rotate the cover to the grind chute to access the grinding chute hole inside to clean the grinder.
4. Locate the clean-out tool access hole on either side of the coffee chute.
5. Gently and with caution insert insert the Clean-out tool into the hole and apply forward pressure
until the tool is fully inserted into the chute.
6. With the clean-out rod fully inserted, wiggle and rotate the tool to loosen the compacted coffee
7. Remove the tool and push the appropriate start button.
8. If the grinders chute clears return to normal operation.
9.If the grinder chute remains clogged, disassemble the grinding burr area and clean thoroughly.
Reset grinder adjustment to the original setting
To Next Page
Loading...
Need help?
General
