11
6 7 8
6. Insert the brush into the collection area above the impeller and again wipe away loose grounds.
7. Clean the impeller with a soft dry cloth.
8. Reinstall the impeller by turning counter-clockwise.
USING THE CLEAN-OUT TOOL
If either Grinder motor fails to operate, the usual cause is a clogged grinding chute or chamber.
2002 model Swifts now come with a tool that can be used to unclog the chute without
disassembling the grinder.
1. With this new modification to the grinder there is no need anymore to remove the tower to
use the clean-out tool.
2. Turn the grind adjust knob 4 turns in the direction of “faster pour”
To Next Page
Loading...
Need help?
General
