Need help?Do you have a question about the Lab.gruppen IPX4800 and is the answer not in the manual?
Summarizes risks of electric shock, opening the unit, and symbol meanings.
Covers safe operation, exposure to elements, servicing, and general handling.
Outlines liability, trademarks, and warranty terms.
Describes the series' power density and DSP capabilities.
Details cooling requirements and operating voltage specifications.
Explains controls, indicators, and connectors on the front and rear panels.
Describes analog and AES3 input types, links, and unbalanced use.
Details Neutrik speakON and binding post output connectors.
Outlines the factory default signal routing and parameter settings.
Illustrates the audio signal path from inputs to outputs.
Explains using buttons and the rotary encoder on the front panel.
Covers downloading, installing, and using the software for network and DSP configuration.
Describes setting up a network of amplifiers using Ethernet.
Guides users on registering their equipment and warranty terms.
Offers advice on handling malfunctions and power connection safety.
Summarizes risks of electric shock, opening the unit, and symbol meanings.
Covers safe operation, exposure to elements, servicing, and general handling.
Outlines liability, trademarks, and warranty terms.
Describes the series' power density and DSP capabilities.
Details cooling requirements and operating voltage specifications.
Explains controls, indicators, and connectors on the front and rear panels.
Describes analog and AES3 input types, links, and unbalanced use.
Details Neutrik speakON and binding post output connectors.
Outlines the factory default signal routing and parameter settings.
Illustrates the audio signal path from inputs to outputs.
Explains using buttons and the rotary encoder on the front panel.
Covers downloading, installing, and using the software for network and DSP configuration.
Describes setting up a network of amplifiers using Ethernet.
Guides users on registering their equipment and warranty terms.
Offers advice on handling malfunctions and power connection safety.
General| Number of Channels | 4 |
|---|---|
| Total Harmonic Distortion (THD) | < 0.1% |
| Gain | 32 dB |
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 20 kΩ |
| Input Sensitivity | 1.4 V |
| Damping Factor | > 200 |
| Dimensions | 19 x 3.5 x 16.5 in |
| Protection | Short circuit, thermal, and overload |
| Power Supply | 100-240V AC, 50/60Hz |
| Connectors Input | XLR |
| Connectors Output | SpeakON |
| Weight | 8.2 kg (18 lbs) |
To Next Page