Need help?Do you have a question about the Lab.gruppen FP+ series and is the answer not in the manual?
General| Series | FP+ |
|---|---|
| Total Harmonic Distortion | <0.1% |
| Damping Factor | >500 |
| Dimensions | 88mm x 483mm x 400mm (HxWxD) |
| Weight | 12.5kg |
| Type | Amplifier |
| Output Voltage | Varies by model |
| Input Impedance | 20 kOhm balanced |
| Gain | 32dB |
| Power Consumption | Varies by model |
| Power Output | 2 x 1300W @ 4Ω, 2 x 800W @ 8Ω |
| Power Supply | Universal, regulated switch mode power supply |
Explains standard warning symbols like lightning and exclamation marks.
Provides critical safety guidelines for amplifier installation and operation.
Lists essential safety and operational steps to follow before using the amplifier.
Provides instructions for connecting audio sources and loudspeakers.
Details the amplifier's protective circuits and how faults are indicated.
Describes front panel indicators and how to adjust channel levels.
Covers the setup and use of the NomadLink network and associated software.
To Next Page