Lab.gruppen FP+ series User Manual

FP+ Series Operation Manual 13
6.2.3 Input and Output connectors
All FP+ Series amplifiers are equipped with balanced XLR-F input connectors. 2-channel models also offer
parallel (“loop-thru”) XLR-M output connectors for daisy-chaining multiple amplifiers from the same signal
source.
All FP+ Series amplifiers except the FP 13000 offer a choice of either binding post (BP) or Neutrik© NL4FC
Speakon output connectors (SP). The FP 13000 is offered with BP connectors only as the potential maximum
output current exceeds the recommended limits for the Speakon connectors.
For specific configuration and wiring information, see section 7.4.
QUICK GUIDE OVERVIEW 6
Audio inputs - 4-channel models Audio inputs and loop-thru connectors - 2-channel
models
Speakon outputs - 4-channel models
Speakon outputs - 2-channel models Binding Posts - 2-channel models
Binding Post outputs - 4-channel models
Input connectors
Output connectors

Lab.gruppen FP+ series Specifications

General

Series	FP+
Total Harmonic Distortion	<0.1%
Damping Factor	>500
Dimensions	88mm x 483mm x 400mm (HxWxD)
Weight	12.5kg
Type	Amplifier
Output Voltage	Varies by model
Input Impedance	20 kOhm balanced
Gain	32dB
Power Consumption	Varies by model
Power Output	2 x 1300W @ 4Ω, 2 x 800W @ 8Ω
Power Supply	Universal, regulated switch mode power supply