Lab.gruppen FP+ series User Manual

26 FP+ Series Operation Manual
Below are typical examples of NomadLink network setups:
Rule 1:• The maximum cable length in between any two devices may not exceed 300 meters / 980 feet.
Rule 2:• In a non-closed-loop daisy-chained subnet the total maximum cable length is 400 meters / 1300
feet.
Rule 3:• In a closed-loop subnet the total maximum cable length is 700 meters / 2300 feet.
7.7.4 Ethernet network cable lengths
The connection between the NLB 60E and your PC is a standard Ethernet network running the TCP/IP protocol.
Cable distances between NLB 60E and your PC follow standard rules for Ethernet systems.
Contact your IT expert for more details.
7.7.5 DeviceControl software
DeviceControl is Lab.gruppen’s proprietary software application for monitoring and controlling networked
FP+ Series and other Lab.gruppen NomadLink-ready power amplifier. DeviceControl runs on a Windows PC,
which connects via Ethernet to the NLB 60E NomadLink Bridge and Network Controller. DeviceControl provides
comprehensive monitoring of amplifier status as well as control of amplifier power on/off and individual channel
mute and solo functions.
Please review the DeviceControl Operation Manual for more detailed information.
7 OPERATION AND PERFORMANCE

Lab.gruppen FP+ series Specifications

General

Series	FP+
Total Harmonic Distortion	<0.1%
Damping Factor	>500
Dimensions	88mm x 483mm x 400mm (HxWxD)
Weight	12.5kg
Type	Amplifier
Output Voltage	Varies by model
Input Impedance	20 kOhm balanced
Gain	32dB
Power Consumption	Varies by model
Power Output	2 x 1300W @ 4Ω, 2 x 800W @ 8Ω
Power Supply	Universal, regulated switch mode power supply