Need help?Do you have a question about the Lab.gruppen FP+ Series FP 10000Q and is the answer not in the manual?
General| Output Power (per channel at 2 ohms) | 2500 W |
|---|---|
| Output Power (per channel at 4 ohms) | 2100 W |
| Output Power (per channel at 8 ohms) | 1300 W |
| Channel Separation | >70 dB |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | < 0.1% |
| Signal to Noise Ratio | >112 dB |
| Damping Factor | >500 |
| Input Sensitivity | 1.4 V |
| Input Impedance | 20 kOhm |
| Voltage Gain | 35 dB |
| Cooling | Temperature controlled fan |
| Protection | Thermal, short circuit, DC |
| Dimensions (W x H x D) | 483 x 88 x 396 mm |
| Weight | 12 kg |
Compact racks power arena-sized systems with headroom. Power output levels are continuous ratings into 2 ohms.
FP+ Series amplifiers are 2U high, weigh 12 kg, and offer advanced features like NomadLink and DeviceControl.
Benefits include unprecedented power density, proven reliability, Class TD output stages, NomadLink, two/four-channel versions, and bridgeability.
Refined R.SMPS and Class TD technologies provide more power in smaller packages with sonic excellence.
Discusses bridgeable two-channel and four-channel models for various sound reinforcement applications.
Proprietary VPL feature allows optimal configuration of individual FP+ channel outputs for specific speaker cabinets.
Advanced design and efficient manufacturing reduce the cost per watt, offering more power per dollar.
NomadLink network and DeviceControl software allow monitoring and control of key operating parameters for up to 960 amplifiers.
NLB 60E provides basic monitoring/control, acting as an Ethernet-to-NomadLink bridge for remote access.
NomadLink is dedicated to Lab.gruppen amplifiers and works with existing systems, ensuring future compatibility.
Automatically identifies detected amplifiers, showing model, serial number, and status. Allows remote power control and labeling.
Allows assigning channels to groups, renaming them, and monitoring critical information like VU meters, mute/solo status, and faults.
Pioneering switch mode power supply technology enabling extreme power density with precise voltage regulation.
Patented Class TD output stage combines Class D efficiency with Class B sonic purity for high performance.
Adjustable input gain and VPL optimize each channel for maximum headroom regardless of input signal or load impedance.
Uses thousands of tiny copper fins and twin fans for efficient, uniform cooling of output devices.
Comprehensive warning and protection features safeguard the amplifier and loudspeakers, with automatic resumption of normal operation.
Bright, color-coded LEDs provide clear status indication of control activation, warnings, and faults without scrolling.
DIP-switch matrix allows setting limiter attack, gain, bridging, and VPL for optimal load characteristics.
Lab.gruppen's roots trace back over three decades, with founders building custom audio equipment from their mid-teens.
Lab.gruppen achieved breakthroughs with Intercooler, R.SMPS, MLS (VPL), and patented Class TD output stages.
Lab.gruppen develops products for touring industry challenges like fuel costs, tight schedules, and budget constraints.
Details peak output power ratings for various impedance loads (16, 8, 4, 2 ohms) for each model.
Provides specifications for THD, Signal To Noise Ratio, Channel Separation, Frequency Response, Input Impedance, and Output Impedance.
Lists selectable VPL voltage settings for single channels and bridged configurations.
Covers amplifier gain selection via rear-panel switches and front-panel level adjustment.
Describes input/output connectors, NomadLink network ports, and fan/power switches.
Details common and per-channel indicators for NomadLink, PAL, power, signal, VPL, CPL, VHF, temperature, and faults.
Includes operating voltage, minimum power-up voltage, PAL, soft start, and mains connector details.
Provides the physical dimensions (width, height, depth) and weight of the amplifiers.
Specifies the chassis finish as black painted steel with a black painted steel/aluminum front.
Lists the certifications and approvals the amplifiers have obtained.
To Next Page
